BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference

206

 Chapter 6: The Configuration Menu BMD00114, August 2009

Note – If RADIUS is enabled, you must login using RADIUS authentication when connecting via

the console or Telnet/SSH/HTTP/HTTPS. Backdoor for console is always enabled, so you can

connect using noradius and the administrator password even if the backdoor (bckdoor) or

secure backdoor (secbd) are disabled.

If Telnet backdoor is enabled (bckdoor ena), type in noradius as a backdoor to bypass

RADIUS checking, and use the administrator password to log into the switch. The switch allows

this even if RADIUS servers are available.

If secure backdoor is enabled (secbd ena), type in noradius as a backdoor to bypass RADIUS

checking, and use the administrator password to log into the switch. The switch allows this only if

RADIUS servers are not available.

bckdoor disable|enable

Enables or disables the RADIUS backdoor for Telnet/SSH/HTTP/HTTPS. The default value

is disabled.

To obtain the RADIUS backdoor password for your switch, contact your Service and Support

line.

secbd disable|enable

Enables or disables the RADIUS back door using secure password for Telnet/SSH/

HTTP/HTTPS. This command does not apply when backdoor (Telnet) is enabled.

Enables the RADIUS server.

off

Disables the RADIUS server.

cur

Displays the current RADIUS server parameters.

Table 91 System Configuration Menu Options (/cfg/sys/radius) (continued)

Command Syntax and Usage