BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
208
 Chapter 6: The Configuration Menu BMD00114, August 2009
Table 92 TACACS+ Server Menu Options (/cfg/sys/tacacs)
Command Syntax and Usage
prisrv <IP address>
Defines the primary TACACS+ server address.
secsrv <IP address>
Defines the secondary TACACS+ server address.
chpass_p
Configures the password for the primary TACACS+ server. The CLI will prompt you for
input.
chpass_s
Configures the password for the secondary TACACS+ server. The CLI will prompt you for
input.
secret <1-32 character secret>
This is the shared secret between the switch and the TACACS+ server(s).
secret2 <1-32 character secret>
This is the secondary shared secret between the switch and the TACACS+ server(s).
port <TACACS port>
Enter the number of the TCP port to be configured, between 1 - 65000. The default is 49.
retries <TACACS server retries, 1-3>
Sets the number of failed authentication requests before switching to a different TACACS+
server. The default is 3 requests.
timeout <TACACS server timeout seconds, 4-15>
Sets the amount of time, in seconds, before a TACACS+ server authentication attempt is
considered to have failed. The default is 5 seconds.
usermap <0-15>
user|oper|admin|none
Maps a TACACS+ authorization level to a switch user level. Enter a TACACS+ authorization
level (0-15), followed by the corresponding switch user level.