BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 209
bckdoor disable|enable
Enables or disables the TACACS+ back door for Telnet, SSH/SCP, or HTTP/HTTPS.
Enabling this feature allows you to bypass the TACACS+ servers. It is recommended that you
use Secure Backdoor to ensure the switch is secured, because Secure Backdoor disallows
access through the back door when the TACACS+ servers are responding.
The default setting is disabled.
To obtain the TACACS+ backdoor password for your switch, contact your Service and
Support line.
secbd enable|disable
Enables or disables TACACS+ secure back door access through Telnet, SSH/SCP, or
HTTP/HTTPS only when the TACACS+ servers are not responding.
This feature is recommended to permit access to the switch when the TACACS+ servers
become unresponsive. If no back door is enabled, the only way to gain access when
TACACS+ servers are unresponsive is to use the back door via the console port.
The default setting is disabled.
cmap enable|disable
Enables or disables TACACS+ privilege-level mapping.
The default value is disabled.
passch enable|disable
Enables or disables TACACS+ password change.
The default setting is disabled.
cauth disable|enable
Enables or disables TACACS+ command authorization.
clog disable|enable
Enables or disables TACACS+ command logging.
Table 92 TACACS+ Server Menu Options (/cfg/sys/tacacs) (continued)
Command Syntax and Usage