BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 213
/cfg/sys/ntp
NTP Server Configuration Menu
This menu enables you to synchronize the switch clock to a Network Time Protocol (NTP) server.
By default, this option is disabled.
[NTP Server Menu]
prisrv - Set primary NTP server address
secsrv - Set secondary NTP server address
intrval - Set NTP server resync interval
on - Turn NTP service ON
off - Turn NTP service OFF
cur - Display current NTP configuration
Table 94 NTP Configuration Menu Options (/cfg/sys/ntp)
Command Syntax and Usage
prisrv <IP address>
Prompts for the IP addresses of the primary NTP server to which you want to synchronize the
switch clock.
secsrv <IP address>
Prompts for the IP addresses of the secondary NTP server to which you want to synchronize
the switch clock.
intrval <5-44640>
Specifies the time interval, in minutes, to re-synchronize the switch clock with the NTP
server.
on
Enables the NTP synchronization service.
off
Disables the NTP synchronization service.
cur
Displays the current NTP service settings.