BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 217
/cfg/sys/ssnmp/snmpv3
SNMPv3 Configuration Menu
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2
Framework by supporting the following:
 a new SNMP message format
 security for messages
 access control
 remote configuration of SNMP parameters
For more details on the SNMPv3 architecture please refer to RFC2271 to RFC2276.
[SNMPv3 Menu]
usm - usmUser Table menu
view - vacmViewTreeFamily Table menu
access - vacmAccess Table menu
group - vacmSecurityToGroup Table menu
comm - community Table menu
taddr - targetAddr Table menu
tparam - targetParams Table menu
notify - notify Table menu
v1v2 - Enable/disable V1/V2 access
cur - Display current SNMPv3 configuration
Table 96 SNMPv3 Configuration Menu Options (/cfg/sys/ssnmp/snmpv3)
Command Syntax and Usage
usm <usmUser number [1-16]>
Defines a user security model (USM) entry for an authorized user.
You can also configure this entry through SNMP. To view menu options, see page 219.
view <vacmViewTreeFamily number [1-128]>
Allows you to create different MIB views. To view menu options, see page 221.
access <vacmAccess number [1-32]>
Configures the access rights. The View-based Access Control Model defines a set of services
that an application can use for checking access rights of the user. You need access control
when you have to process retrieval or modification request from an SNMP entity. To view
menu options, see page 222.