BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
218
 Chapter 6: The Configuration Menu BMD00114, August 2009
group <vacmSecurityToGroup number [1-16]>
Maps the user name to the access group names and their access rights needed to access SNMP
management objects. A group defines the access rights assigned to all names that belong to a
particular group. To view menu options, see page 224.
comm <snmpCommunity number [1-16]>
The community table contains objects for mapping community strings and
version-independent SNMP message parameters. To view menu options, see page 225.
taddr <snmpTargetAddr number [1-16]>
Allows you to configure destination information, consisting of a transport domain and a
transport address. This is also termed as transport endpoint. The SNMP MIB provides a
mechanism for performing source address validation on incoming requests, and for selecting
community strings based on target addresses for outgoing notifications. To view menu
options, see page 226.
tparam <target params index [1-16]>
Allows you to configure SNMP parameters, consisting of message processing model, security
model, security level, and security name information. There may be multiple transport
endpoints associated with a particular set of SNMP parameters, or a particular transport
endpoint may be associated with several sets of SNMP parameters. To view menu options,
see page 227.
notify <notify index [1-16]>
A notification application typically monitors a system for particular events or conditions, and
generates Notification-Class messages based on these events or conditions. To view menu
options, see page 229.
v1v2 disable|enable
Allows you to enable or disable the access to SNMP version 1 and version 2.
The default setting is enabled.
cur
Displays the current SNMPv3 configuration.
Table 96 SNMPv3 Configuration Menu Options (/cfg/sys/ssnmp/snmpv3)