BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
238
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/port <port number>
Port Configuration Menu
Use the Port Configuration menu to configure settings for switch ports.
Note – Port 19 is reserved for switch management.
[Port 1 Menu]
gig - Gig Phy Menu
udld - UDLD Menu
oam - OAM Menu
aclqos - Acl/Qos Configuration Menu
stp - STP Menu - for PVRST only
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
rmon - Enable/disable RMON for port
learn - Enable/Disable FDB Learning for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
floodblk - Enable/disable Port flood blocking
brate - Set BroadCast Threshold
mrate - Set MultiCast Threshold
drate - Set Dest. Lookup Fail Threshold
ena - Enable port
dis - Disable port
cur - Display current port configuration
Table 112 Port Configuration Menu (/cfg/port)
Command Syntax and Usage
gig
If a port is configured to support Gigabit Ethernet, this option displays the Gigabit Ethernet
Physical Link Menu. To view menu options, see page 241.
udld
Displays the Unidirectional Link Detection (UDLD) Menu. To view menu options, see
page 243.
oam
Displays the OAM Discovery Configuration Menu. To view menu options, see page 244.