BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 239
aclqos
Displays the ACL/QoS Configuration Menu. To view menu options, see page 245.
stp
Displays the Spanning Tree Port menu. To view menu options, see page 246.
8021ppri <0-7>
Configures the port’s 802.1p priority level.
pvid <VLAN number>
Sets the default VLAN number which will be used to forward frames which are not VLAN
tagged. The default number is 1 for non-management ports.
Note: VLAN 4095 is reserved for switch management.
name <1-64 characters>|none
Sets a name for the port. The assigned port name appears next to the port number on some
information and statistics screens. The default setting is none.
dscpmark
Enables or disables DSCP re-marking on a port.
rmon e|d
Enables or disables Remote Monitoring for the port. RMON must be enabled for any RMON
configurations to function.
tag disable|enable
Disables or enables VLAN tagging for this port. The default setting is disabled for uplink
ports and enabled for downlink ports.
tagpvid disable|enable
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is removed from
packets whose VLAN tag matches the port PVID. The default setting is disabled for
uplink ports and downlink ports, and enabled for management ports.
Table 112 Port Configuration Menu (/cfg/port) (continued)
Command Syntax and Usage