BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
246
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/port <port number>/stp
Port Spanning Tree Configuration Menu
[Port 1 STP Menu]
edge - Enable/disable edge port (for PVRST only)
link - Set port link type (auto, p2p, or shared; default: auto)
(for PVRST only)
cur - Display current port stp configuration
Table 117 Port STP menu options (/cfg/port/stp)
Command Syntax and Usage
edge e|d
Enables or disables this port as an edge port. An edge port is not connected to a bridge, and
can begin forwarding traffic as soon as the link is up. Configure server ports as edge ports
(enabled).
link auto|p2p|shared
Defines the type of link connected to the port, as follows:
 auto: Configures the port to detect the link type, and automatically match its settings.
 p2p: Configures the port for Point-To-Point protocol.
 shared: Configures the port to connect to a shared medium (usually a hub).
cur
Displays current STP parameters for the port.