BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
266
 Chapter 6: The Configuration Menu BMD00114, August 2009
thash
Displays the IP Trunk Hash Menu. To view menu options, see page 294.
lacp
Displays the Link Aggregation Control Protocol Menu. To view menu options, see page 296.
failovr
Displays the Failover Configuration Menu. To view menu options, see page 298.
hotlink
Displays the Hot Links Configuration menu. To view menu options, see page 304.
vlan <VLAN number (1-4095)>
Displays the VLAN Configuration Menu. To view menu options, see page 308.
pvstcomp enable|disable
Enables or disables VLAN tagging of spanning tree BPDUs. The default setting is enabled.
bpdugrd enable|disable
Enables or disables BPDU guard, to avoid spanning-tree loops on ports with Port Fast
Forwarding enabled (/cfg/port x/fastfwd ena).
upfast enable|disable
Enables or disables Fast Uplink Convergence, which provides rapid Spanning Tree
convergence to an upstream switch during failover.
Note: When enabled, this feature increases bridge priorities to 65535 for all STGs and path
cost by 3000 for all external STP ports.
update <10-200>
Configures the station update rate. The default value is 40.
cur
Displays current Layer 2 parameters.
Table 134 Layer 2 Configuration Menu (/cfg/l2) (continued)
Command Syntax and Usage