BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
268
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l2/8021x/global
802.1X Global Configuration Menu
The global 802.1X menu allows you to configure parameters that affect all switch ports (except the
management port).
[802.1X Global Configuration Menu]
gvlan - 802.1X Guest VLAN configuration menu
mode - Set access control mode
qtperiod - Set EAP-Request/Identity quiet time interval
txperiod - Set EAP-Request/Identity retransmission timeout
suptmout - Set EAP-Request retransmission timeout
svrtmout - Set server authentication request timeout
maxreq - Set max number of EAP-Request retransmissions
raperiod - Set reauthentication time interval
reauth - Set reauthentication status to on or off
default - Restore default 802.1X configuration
cur - Display current 802.1X configuration
Table 136 802.1X Global Configuration Menu Options (/cfg/l2/8021x/global)
Command Syntax and Usage
gvlan
Displays the 802.1X Guest VLAN Configuration Menu. To view menu options, see page 270.
mode force-unauth|auto|force-auth
Sets the type of access control for all ports:
 force-unauth: the port is unauthorized unconditionally.
 auto: the port is unauthorized until it is successfully authorized by the RADIUS server.
 force-auth: the port is authorized unconditionally, allowing all traffic.
The default value is force-auth.
qtperiod <0-65535>
Sets the time, in seconds, the authenticator waits before transmitting an EAP-Request/
Identity frame to the supplicant (client) after an authentication failure in the previous round of
authentication. The default value is 60 seconds.
txperiod <1-65535>
Sets the time, in seconds, the authenticator waits for an EAP-Response/Identity frame from
the supplicant (client) before retransmitting an EAP-Request/Identity frame. The default
value is 30 seconds.