BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 269
suptmout <1-65535>
Sets the time, in seconds, the authenticator waits for an EAP-Response packet from the
supplicant (client) before retransmitting the EAP-Request packet to the authentication server.
The default value is 30 seconds.
svrtmout <1-65535>
Sets the time, in seconds, the authenticator waits for a response from the RADIUS server
before declaring an authentication timeout. The default value is 30 seconds.
The time interval between transmissions of the RADIUS Access-Request packet containing
the supplicant’s (client’s) EAP-Response packet is determined by the current setting of
/cfg/sys/radius/timeout (default is 3 seconds).
maxreq <1-10>
Sets the maximum number of times the authenticator retransmits an EAP-Request packet to
the supplicant (client). The default value is 2.
raperiod <1-604800>
Sets the time, in seconds, the authenticator waits before re-authenticating a supplicant (client)
when periodic re-authentication is enabled. The default value is 3600 seconds.
reauth on|off
Sets the re-authentication status to on or off. The default value is off.
default
Resets the global 802.1X parameters to their default values.
cur
Displays current global 802.1X parameters.
Table 136 802.1X Global Configuration Menu Options (/cfg/l2/8021x/global)
Command Syntax and Usage