BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
278
 Chapter 6: The Configuration Menu BMD00114, August 2009
link [auto|p2p|shared]
Defines the type of link connected to the port, as follows:
 auto: Configures the port to detect the link type, and automatically match its settings.
 p2p: Configures the port for Point-To-Point protocol.
 shared: Configures the port to connect to a shared medium (usually a hub).
The default link type is auto.
edge disable|enable
Enables or disables this port as an edge port. An edge port is not connected to a bridge, and
can begin forwarding traffic as soon as the link is up. Configure server ports as edge ports
(enabled). The default setting is disabled.
Note: After you configure the port as an edge port, you must disable the port
(/oper/port x/dis) and then re-enable the port (/oper/port x/ena) for the change
to take effect.
on
Enables MRST on the port.
off
Disables MRST on the port.
cur
Displays the current CIST port configuration.
Table 142 CIST Port Configuration Menu Options (/cfg/l2/mrst/cist/port)
Command Syntax and Usage