BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
284
 Chapter 6: The Configuration Menu BMD00114, August 2009
link [auto|p2p|shared]
Defines the type of link connected to the port, as follows:
 auto: Configures the port to detect the link type, and automatically match its settings.
 p2p: Configures the port for Point-To-Point protocol.
 shared: Configures the port to connect to a shared medium (usually a hub).
The default link type is auto.
edge disable|enable
Enables or disables this port as an edge port. An edge port is not connected to a bridge, and
can begin forwarding traffic as soon as the link is up. Configure server ports as edge ports
(enabled).
on
Enables STG on the port.
off
Disables STG on the port.
cur
Displays the current STG port parameters.
Table 145 Spanning Tree Port Menu Options (/cfg/l2/stg/port) (continued)
Command Syntax and Usage