BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
290
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l2/lldp/port <port number>
LLDP Port Configuration Menu
Use the following commands to configure LLDP port options.
[LLDP Port 2 Menu]
admstat - Set LLDP admin-status of this port
snmptrap - Enable/disable SNMP trap notification of this port
tlv - Optional TLVs Menu
cur - Show current LLDP port parameters
Table 150 LLDP Port Menu Options (/cfg/l2/lldp/port)
Command Syntax and Usage
admstat disabled|tx_only|rx_only|tx_rx
Configures the LLDP transmission type for the port, as follows:
 Transmit only
 Receive only
 Transmit and receive
 Disabled
The default value is tx_rx.
snmptrap e|d
Enables or disables SNMP trap notification for LLDP messages.
tlv
Displays the Optional TLV menu for the selected port. To view menu options, see page 291.
cur
Display current LLDP configuration.