BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
298
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l2/failovr
Layer 2 Failover Configuration Menu
Use this menu to configure Layer 2 Failover. For more information about Layer 2 Failover, see
“High Availability” in the BLADE OS Application Guide.
[Failover Menu]
trigger - Trigger Menu
vlan - Globally turn VLAN Monitor ON/OFF
on - Globally turn Failover ON
off - Globally turn Failover OFF
cur - Display current Failover configuration
Table 157 Layer 2 Failover Menu Options (/cfg/l2/failovr)
Command Syntax and Usage
trigger <1-8>
Displays the Failover Trigger menu. To view menu options, see page 299.
vlan on|off
Globally turns VLAN monitor on or off. When the VLAN Monitor is on, the switch
automatically disables only downlink ports that belong to the same VLAN as ports in the
failover trigger. The default value is off.
on
Globally turns Layer 2 Failover on.
off
Globally turns Layer 2 Failover off.
cur
Displays current Layer 2 Failover parameters.