BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
308
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l2/vlan <VLAN number>
VLAN Configuration Menu
The commands in this menu configure VLAN attributes, change the status of each VLAN, change
the port membership of each VLAN, and delete VLANs.
By default, the VLAN menu option is disabled except VLAN 1, which is enabled all the time.
Downlink ports and uplink ports are in VLAN 1 by default. Up to 1000 VLANs can be configured
on the switch. VLAN 4095 is reserved for switch management.
[VLAN 1 Menu]
pvlan - Protocol VLAN Menu
privlan - Private-VLAN Menu
name - Set VLAN name
stg - Assign VLAN to a Spanning Tree Group
add - Add port to VLAN
rem - Remove port from VLAN
def - Define VLAN as list of ports
ena - Enable VLAN
dis - Disable VLAN
del - Delete VLAN
cur - Display current VLAN configuration
Table 166 VLAN Configuration Menu Options (/cfg/l2/vlan)
Command Syntax and Usage
pvlan <1-8>
Displays the Protocol-based VLAN menu. To view menu options, see page 310.
privlan
Displays the Private VLAN menu. To view menu options, see page 312.
name
Assigns a name to the VLAN or changes the existing name. The default VLAN name is the
first one.
stg <STG index>
Assigns a VLAN to a Spanning Tree Group.
add <port number>
Adds port(s) to the VLAN membership.
rem <port number>
Removes port(s) from this VLAN.