BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 309
Note – All ports must belong to at least one VLAN. Any port which is removed from a VLAN and
which is not a member of any other VLAN is automatically added to default VLAN 1. You cannot
remove a port from VLAN 1 if the port has no membership in any other VLAN. Also, you cannot
add a port to more than one VLAN unless the port has VLAN tagging turned on (see the tag
command on page 238).
def <list of port numbers>
Defines which ports are members of this VLAN. Every port must be a member of at least one
VLAN. By default, downlink ports and uplink ports are in VLAN 1.
ena
Enables this VLAN.
dis
Disables this VLAN without removing it from the configuration.
del
Deletes this VLAN.
cur
Displays the current VLAN configuration.
Table 166 VLAN Configuration Menu Options (/cfg/l2/vlan) (continued)
Command Syntax and Usage