BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
310
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l2/vlan/pvlan <protocol number>
Protocol-Based VLAN Configuration Menu
Use this menu to configure Protocol-based VLAN (PVLAN) for the selected VLAN.
[VLAN 1 Protocol 1 Menu]
pty - Set protocol type
protocol - Select a predefined protocol
prio - Set priority to protocol
add - Add port to PVLAN
rem - Remove port from PVLAN
ports - Add/Remove a list of ports to/from PVLAN
tagpvl - Enable/Disable port tagging for PVLAN
taglist - Enable tagging a port list for PVLAN
del - Delete protocol
ena - Enable protocol
dis - Disable protocol
cur - Display current PVLAN configuration
Table 167 PVLAN Menu Options (/cfg/l2/vlan/pvlan)
Command Syntax and Usage
pty <(Ether2|SNAP|LLC)> <Ethernet type>
Configures the frame type and the Ethernet type for the selected protocol. Ethernet type
consists of a 4-digit (16 bit) hex code, such as 0080 (IPv4).
protocol <protocol type>
Selects a pre-defined protocol, as follows:
 decEther2: DEC Local Area Transport
 ipv4Ether2: Internet IP (IPv4)
 ipv6Ether2:IPv6
 ipx802.2: Novell IPX 802.2
 ipx802.3: Novell IPX 802.3
 ipxEther2: Novell IPX
 ipxSnap: Novell IPX SNAP
 netbios: NetBIOS 802.2
 rarpEther2: Reverse ARP
 sna802.2: SNA 802.2
 snaEther2: IBM SNA Service on Ethernet
 vinesEther2: Banyan VINES
 xnsEther2: XNS Compatibility