BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 315
/cfg/l3/if <interface number>
IP Interface Configuration Menu
The switch can be configured with up to 256 IP interfaces. Each IP interface represents the switch
on an IP subnet on your network. The Interface option is disabled by default.
[IP Interface 1 Menu]
addr - Set IP address
mask - Set subnet mask
vlan - Set VLAN number
relay - Enable/disable BOOTP relay
ena - Enable IP interface
dis - Disable IP interface
del - Delete IP interface
cur - Display current interface configuration
Table 170 IP Interface Menu Options (/cfg/l3/if)
Command Syntax and Usage
addr <IPv4 address (such as 192.4.17.101)>
Configures the IPv4 address of the switch interface, using dotted decimal notation.
mask <IP subnet mask (such as 255.255.255.0)>
Configures the IP subnet address mask for the interface using dotted decimal notation.
vlan <VLAN number>
Configures the VLAN number for this interface. Each interface can belong to only one
VLAN. Each VLAN can contain multiple IPv4 interfaces.
relay disable|enable
Enables or disables the BOOTP relay on this interface. It is enabled by default.
ena
Enables this IP interface.
dis
Disables this IP interface.
del
Removes this IP interface.
cur
Displays the current interface settings.