BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 321
/cfg/l3/nwf <1-256>
Network Filter Configuration Menu
[IP Network Filter 1 Menu]
addr - IP Address
mask - IP network filter mask
enable - Enable Network Filter
disable - Disable Network Filter
delete - Delete Network Filter
cur - Display current Network Filter configuration
Table 176 IP Network Filter Menu Options (/cfg/l3/nwf)
Command Syntax and Usage
addr <IP address, such as 192.4.17.44>
Sets the IP address that will be accepted by the peer when the filter is enabled. If used with the
mask option, a range of IP addresses is accepted. The default address is 0.0.0.0
mask <IP network filter mask>
Sets the network filter mask that is used with addr. The default value is 0.0.0.0
enable
Enables the Network Filter configuration.
disable
Disables the Network Filter configuration.
delete
Deletes the Network Filter configuration.
cur
Displays the current the Network Filter configuration.