BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
322
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l3/rmap <route map number>
Routing Map Configuration Menu
Note – The map number (1-32) represents the routing map you wish to configure.
Routing maps control and modify routing information.
[IP Route Map 1 Menu]
alist - Access List number
metric - Set metric of the matched route
type - Set OSPF metric-type of the matched route
prec - Set the precedence of this route map
enable - Enable route map
disable - Disable route map
delete - Delete route map
cur - Display current route map configuration
Table 177 Routing Map Menu Options (/cfg/l3/rmap)
Command Syntax and Usage
alist <number 1-8>
Displays the Access List menu. For more information, see page 324.
metric <1-16777214>|none
Sets the metric of the matched route.
type <value (1|2)>|none
Assigns the type of OSPF metric. The default is type 1.
 Type 1—External routes are calculated using both internal and external metrics.
 Type 2—External routes are calculated using only the external metrics. Type 1 routes
have more cost than Type 2.
 none—Removes the OSPF metric.
prec <value (1-255)>
Sets the precedence of the route map. The smaller the value, the higher the precedence.
Default value is 10.
enable
Enables the route map.
disable
Disables the route map.