BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
324
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l3/rmap <route map number>/alist <access list number>
IP Access List Configuration Menu
Note – The route map number (1-32) and the access list number (1-8) represent the IP access list
you wish to configure.
[IP Access List 1 Menu]
nwf - Network Filter number
metric - Metric
action - Set Network Filter action
enable - Enable Access List
disable - Disable Access List
delete - Delete Access List
cur - Display current Access List configuration
Table 178 IP Access List Menu Options (/cfg/l3/rmap/alist)
Command Syntax and Usage
nwf <network filter number (1-256)>
Sets the network filter number. See “/cfg/l3/nwf <1-256>” on page 321 for details.
metric <1-16777214>|none
Sets the metric value in the AS-External (ASE) LSA.
action permit|deny
Permits or denies action for the access list.
enable
Enables the access list.
disable
Disables the access list.
delete
Deletes the access list.
cur
Displays the current Access List configuration.