BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 325
/cfg/l3/rip
Routing Information Protocol Configuration Menu
The RIP Menu is used for configuring Routing Information Protocol (RIP) parameters. This option
is turned off by default.
Note – Do not configure RIP version 1 parameters if your routing equipment uses RIP version 2.
[Routing Information Protocol Menu]
if - RIP Interface Menu
update - Set update period in seconds
redist - RIP Route Redistribute Menu
on - Globally turn RIP ON
off - Globally turn RIP OFF
current - Display current RIP configuration
Table 179 RIP Menu Options (/cfg/l3/rip)
Command Syntax and Usage
if <interface number>
Displays the RIP Interface menu. For more information, see page 326.
update <1-120>
Configures the time interval for sending for RIP table updates, in seconds. The default value
is 30 seconds.
redist fixed|static|ospf|eospf
Displays the RIP Route Redistribution menu. For more information, see page 328.
on
Globally turns RIP on.
off
Globally turns RIP off.
cur
Displays the current RIP configuration.