BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 335
dead <1-65535>
dead <1-65535ms>
Configures the health parameters of a hello packet, in seconds or milliseconds, before
declaring a silent router to be down.
trans <1-3600>
Configures the transit delay in seconds.
retra <1-3600>
Configures the retransmit interval in seconds.
key <key>|none
Sets the authentication key to clear the password.
mdkey <key ID (1-255)>|none
Assigns an MD5 key to the interface.
passive enable|disable
Sets the interface as passive. On a passive interface, you can disable OSPF protocol
exchanges, but the router advertises the interface in its LSAs so that IP connectivity to the
attached network segment will be established.
ptop enable|disable
Sets the interface as point-to-point.
enable
Enables OSPF interface.
disable
Disables OSPF interface.
delete
Deletes OSPF interface.
cur
Displays the current settings for OSPF interface.
Table 185 OSPF Interface Configuration Menu Options (/cfg/l3/ospf/if)
Command Syntax and Usage