BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 345
/cfg/l3/igmp/mrouter
IGMP Static Multicast Router Configuration Menu
Table 193 describes the commands used to configure a static multicast router.
Note – When you configure a static multicast router on a VLAN, the switch continues to learn
dynamic multicast routers on that VLAN.
dis
Disables IGMP version 3.
cur
Displays the current IGMP version 3 configuration.
Table 192 IGMP V3 Menu Options (/cfg/l3/igmp/snoop/igmpv3) (continued)
Command Syntax and Usage
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
clear - Remove all Static Multicast Router Ports
cur - Display current Multicast Router configuration
Table 193 IGMP Static Multicast Router Menu Options (/cfg/l3/igmp/mrouter)
Command Syntax and Usage
add <port number> <VLAN number> <IGMP version number>
Selects a port/VLAN combination on which the static multicast router is connected, and
configures the IGMP version (1, 2, or 3) of the multicast router.
remove <port number> <VLAN number> <IGMP version number>
Removes a static multicast router from the selected port/VLAN combination.
clear
Clears all static multicast routers from the switch.
cur
Displays the current IGMP Static Multicast Router parameters.