BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
362
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l3/vrrp/track
VRRP Tracking Configuration Menu
This menu is used for setting weights for the various criteria used to modify priority levels during
the master router election process. Each time one of the tracking criteria is met (see “VRRP Virtual
Router Priority Tracking Menu” on page 356), the priority level for the virtual router is increased by
an amount defined through this menu.
Note – These priority tracking options only define increment values. These options do not affect
the VRRP master router election process until options under the VRRP Virtual Router Priority
Tracking Menu (see page 356) are enabled.
[VRRP Tracking Menu]
vrs - Set priority increment for virtual router tracking
ifs - Set priority increment for IP interface tracking
ports - Set priority increment for VLAN switch port tracking
cur - Display current VRRP Priority Tracking configuration
Table 205 VRRP Tracking Menu Options (/cfg/l3/vrrp/track)
Command Syntax and Usage
vrs <0-254>
Defines the priority increment value (0 through 254) for virtual routers in master mode
detected on this switch. The default value is 2.
ifs <0-254>
Defines the priority increment value (0 through 254) for active IP interfaces detected on this
switch. The default value is 2.
ports <0-254>
Defines the priority increment value (0 through 254) for active ports on the virtual router’s
VLAN. The default value is 2.
cur
Displays the current configuration of priority tracking increment values.