BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 363
/cfg/l3/sm
ServerMobility™ Configuration Menu
The following table describes the Server Mobility Configuration menu options. For more
information about ServerMobility, see the BLADE OS Application Guide.
[ServerMobility Menu]
port - Server Mobility Port Menu
recovery - Server Mobility Auto-Recovery Menu
default - Set ServerMobility configuration to factory default
scheme - Set ServerMobility encoding scheme
add - Add ServerMobility ports
rem - Remove ServerMobility ports
filter - Enable/Disable DHCP request message filters on ports
nsmrelay - Enable/Disable relay on non-ServerMobility ports
on - Globally turn ServerMobility ON
off - Globally turn ServerMobility OFF
cur - Display current ServerMobility configuration
Table 206 ServerMobility Menu Options (/cfg/l3/sm)
Command Syntax and Usage
port <port number>
Displays the Server Mobility port menu.
recovery
Displays the Server Mobility Auto-Recovery menu.
default
Resets the Server Mobility parameters to their factory default values.
scheme vmac|chassis|switch
Selects the ServerMobility encoding scheme, as follows:
 vmac: Use the port’s virtual MAC address
 chassis: Use the chassis ID
 switch: Use the switch name
add <port number>
Configures a port as a Server Mobility port.
rem <port number>
Removes the port from Server Mobility.