BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
366
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l3/sm/recovery
ServerMobility™ Auto-Recovery Configuration Menu
Auto-Recovery allows a backup port to automatically take over for a failed ServerMobility port.
The following table describes the Server Mobility Auto-Recovery menu options.
[Server Auto-Recovery Menu]
time - Set auto-recovery time
ena - Enable auto-recovery
dis - Disable auto-recovery
cur - Display current configuration
Table 208 ServerMobility Auto-Recovery Options (/cfg/l3/sm/recovery)
Command Syntax and Usage
time <1-255>
Configures the auto-recovery timer, in seconds. If the active port fails (link state is down), the
backup port sends a DCHP request after the timer expires.
The default value is 5 seconds.
ena
Enables ServerMobility Auto-Recovery. The default setting is disabled.
dis
Enables ServerMobility Auto-Recovery.
cur
Displays the current ServerMobility Auto-Recovery settings.