BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 367
/cfg/l3/loopif <interface number (1-5)>
IP Loopback Interface Configuration Menu
An IP loopback interface is not connected to any physical port. A loopback interface is always
accessible over the network.
[IP Loopback Interface 2 Menu]
addr - Set IP address
mask - Set subnet mask
ena - Enable IP interface
dis - Disable IP interface
del - Delete IP interface
cur - Display current interface configuration
Table 209 IP Loopback Interface Menu Options (/cfg/l3/loopif)
Command Syntax and Usage
addr <IP address>
Defines the loopback interface IP address.
mask <subnet mask>
Defines the loopback interface subnet mask.
ena
Enables the loopback interface.
dis
Disables the loopback interface.
del
Deletes the selected loopback interface.
cur
Displays the current IP loopback interface parameters.