BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
374
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/l3/sfd/ltm
SFD Link to Monitor Menu
The following table describes the Link to Monitor (LtM) Menu options. The LtM can consist of
only downlink ports (1-16) or a single trunk containing only downlink ports.
[Link to Monitor Menu]
addport - Add port to Link to Monitor
remport - Remove port from Link to Monitor
addtrnk - Add trunk to Link to Monitor
remtrnk - Remove trunk from Link to Monitor
addkey - Add adminkey to Link to Monitor
remkey - Remove adminkey from Link to Monitor
cur - Display current LtM configuration
Table 215 SFD Link to Monitor Menu Options (/cfg/sfd/ltm)
Command Syntax and Usage
addport <port number>
Adds a port to the LtM. Only downlink ports (1-16) are allowed in the SFD LtM.
remport <port number>
Removes a port from the LtM.
addtrnk <trunk number>
Adds a trunk group to the LtM. The LtM trunk group can contain only downlink ports (1-16).
remtrnk <trunk number>
Removes a trunk group from the LtM.
addkey <1-65535>
Adds an LACP admin key to the LtM. LACP trunks formed with this admin key will be
included in the SFD LtM.
remkey <1-65535>
Removes an LACP admin key from the LtM.
cur
Displays the current SFD Link to Monitor parameters.