BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 375
/cfg/l3/sfd/lte
SFD Link to Enable Menu
The following table describes the SFD Link to Enable (LtE) Menu options. The LtE can consist of
only interconnect ports or a single trunk containing only interconnect ports.
[Link to Enable Menu]
addport - Add port to Link to Enable
remport - Remove port from Link to Enable
addtrnk - Add trunk to Link to Enable
remtrnk - Remove trunk from Link to Enable
addkey - Add adminkey to Link to Enable
remkey - Remove adminkey from Link to Enable
cur - Display current Link to Enable configuration
Table 216 SFD Link to Enable Menu Options (/cfg/sfd/lte)
Command Syntax and Usage
addport <port number>
Adds a port to the LtE. Only interconnect ports are allowed in the LtE.
remport <port number>
Removes a port from the LtE.
addtrnk <trunk number>
Adds a trunk group to the LtE. The LtE trunk group can contain only interconnect ports.
remtrnk <trunk number>
Removes a trunk group from the LtE.
addkey <1-65535>
Adds an LACP admin key to the LtE. LACP trunks formed with this admin key will be
included in the LtE.
remkey <1-65535>
Removes an LACP admin key from the LtE.
cur
Displays the current SFD Link to Enable parameters.