BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
376
 Chapter 6: The Configuration Menu BMD00114, August 2009
/cfg/setup
Setup
The setup program steps you through configuring the system date and time, BOOTP, IP, Spanning
Tree, port speed/mode, VLAN parameters, and IP interfaces.
To start the setup program, at the Configuration# prompt, enter:
For a complete description of how to use setup, see “First-Time Configuration” on page 23.
/cfg/dump
Dump
The dump program writes the current switch configuration to the terminal screen. To start the dump
program, at the Configuration# prompt, enter:
The configuration is displayed with parameters that have been changed from the default values. The
screen display can be captured, edited, and placed in a script file, which can be used to configure
other switches through a Telnet connection. When using Telnet to configure a new switch, paste the
configuration commands from the script file at the command line prompt of the switch. The active
configuration can also be saved or loaded via TFTP, as described on page 377.
Configuration# setup
Configuration# dump