BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
382
 Chapter 7: The Operations Menu BMD00114, August 2009
/oper/port <port number>/8021x
Operations-Level Port 802.1X Options Menu
Operations-level port 802.1X options are used to temporarily set 802.1X parameters for a port.
[802.1X Operation Menu]
reset - Reinitialize 802.1X access control on this port
reauth - Initiate reauthentication on this port now
Table 219 Operations-Level Port 802.1X Menu Options (/oper/port x/8021x)
Command Syntax and Usage
reset
Re-initializes the 802.1X access-control parameters for the port. The following actions take
place, depending on the 802.1X port configuration:
 force unauth - the port is placed in unauthorized state, and traffic is blocked.
 auto - the port is placed in unauthorized state, then authentication is initiated.
 force auth - the port is placed in authorized state, and authentication is not required.
reauth
Re-authenticates the supplicant (client) attached to the port. This command only applies if the
port’s 802.1X mode is configured as auto.