BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 4: The Information Menu
 73
/info/l2/lacp/dump
Show All LACP Information
LACP dump includes the following information for each uplink port:
 lacp Displays the port’s LACP mode (active, passive, or off).
 adminkey Displays the value of the port’s adminkey.
 operkey Shows the value of the port’s operational key.
 selected Indicates whether the port has been selected to be part of a Link Aggregation
Group.
 prio Shows the value of the port priority.
 aggr Displays the aggregator associated with each port.
 trunk This value represents the LACP trunk group number.
 status Displays the status of LACP on the port (up or down).
/info/l2/failovr
Layer 2 Failover Information Menu
Table 20 describes the Layer 2 Failover information options.
port mode adminkey operkey selected prio aggr trunk status
-----------------------------------------------------------------------
1 off 1 1 yes 32768 -- -- --
2 off 2 2 yes 32768 -- -- --
3 off 3 3 no 32768 -- -- --
4 off 4 4 no 32768 -- -- --
5 off 5 5 no 32768 -- -- --
...
[Failover Info Menu]
trigger - Show Trigger information
Table 20 Failover Menu Options (/info/l2/failovr)
Command Syntax and Usage
trigger <trigger number>
Displays detailed information about the selected Layer 2 Failover trigger.