BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
92
 Chapter 4: The Information Menu BMD00114, August 2009
/info/l3/route
IP Routing Information Menu
Using the commands listed below, you can display all or a portion of the IP routes currently held in
the switch.
[IP Routing Menu]
find - Show a single route by destination IP address
gw - Show routes to a single gateway
type - Show routes of a single type
tag - Show routes of a single tag
if - Show routes on a single interface
dump - Show all routes
Table 30 Route Information Menu Options (/info/l3/route)
Command Syntax and Usage
find <IP address (such as 192.4.17.101)>
Displays a single route by destination IP address.
gw <default gateway address (such as 192.4.17.44)>
Displays routes to a single gateway.
type indirect|direct|local|broadcast|martian|multicast
Displays routes of a single type. For a description of IP routing types, see Table 31 on
page 95.
tag fixed|static|addr|rip|ospf|broadcast|martian|multicast
Displays routes of a single tag. For a description of IP routing types, see Table 32 on page 96.
if <interface number>
Displays routes on a single interface.
dump
Displays all routes configured in the switch. For more information, see page 95.