BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
108
 Chapter 2: Information Commands BMD00115, August 2009
Server Link Failure Detection Information
The following command displays Server Link Failure Detection (SFD) information:
show sfd
Command mode: All
Server Link Failure Detection (SFD) information includes:
 SFD status, either enabled or disabled
 LtM status and member ports
 Spanning Tree status for LtM ports
 LtE status and member ports
Information Dump
The following command dumps switch information:
show information-dump
Command mode:
All
Use the dump command to dump all switch information available (10K or more, depending on your
configuration). This data is useful for tuning and debugging switch performance.
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
LtM status: Down
Member STG STG State Link Status
--------- ---- ------------ -----------
port 2 disabled
1 DISABLED *
port 4 disabled
1 DISABLED *
* = STP turned off for this port.
LtE status: Auto Enabled
Member Link Status
--------- -----------
port 17 up
port 18 up