BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 3: Statistics Commands
 169
Server Link Failure Detection Statistics
The following command allows you to display Server Link Failure Detection (SFD) statistics.
show sfd counters
Command mode:
All
Statistics Dump
The following command dumps switch statistics:
show counters
Use the dump command to d
ump all switch statistics (40K or more, depending on your configuration). This
data can be used to tune or debug switch performance.
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump command.
Server Link Failure Detection statistics:
Number of times LtM link failure: 1
Number of times LtM link in Blocking State: 0
Number of times LtE got auto enabled: 1
Table 86 SFD Statistics
Field Description
Number of times LtM
link failure
The total numbers of times that link failures were detected on the
downlink ports in the Link to Monitor group.
Number of times LtM
link in Blocking
Stat
The total number of times that Spanning Tree Blocking state was
detected on the downlink ports in the Link to Monitor group.
Number of times LtE
got auto enabled
The total numbers of times that cross-connect ports in the Link to
Enable group were automatically enabled because of a failure in the
Link to Monitor group.