BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 173
System Configuration
These commands provide configuration of switch management parameters such as user and
administrator privilege mode passwords, Web-based management settings, and management access
lists.
Table 88 System Configuration Commands
Command Syntax and Usage
system date <yyyy> <mm> <dd>
Prompts the user for the system date. The date retains its value when the switch is reset.
Command mode: Global configuration
system time <hh>:<mm>:<ss>
Configures the system time using a 24-hour clock format. The time retains its value when the
switch is reset.
Command mode: Global configuration
system timezone
Configures the time zone where the switch resides. You are prompted to select your location
(continent, country, region) by the timezone wizard. Once a region is selected, the switch
updates the time to reflect local changes to Daylight Savings Time, etc.
Command mode: Global configuration
[no] system olddaylight
Enables or disables use of the Daylight Saving Time (DST) rules in effect prior to the year
2007. The default setting is disabled.
Command mode: Global configuration
[no] system daylight
Disables or enables daylight savings time in the system clock. When enabled, the switch will
add an extra hour to the system clock so that it is consistent with the local clock. By default,
this option is disabled.
Command mode: Global configuration
system idle <1-60>
Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default is 10 minutes.
Command mode: Global configuration