BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
174
 Chapter 4: Configuration Commands BMD00115, August 2009
system notice <1-1024 characters multi-line with ‘-’ to end)>
Displays login notice immediately before the “Enter password:” prompt. This notice can
contain up to 1024 characters and new lines.
Command mode: Global configuration
[no] banner <1-80 characters>
Configures a login banner of up to 80 characters. When a user or administrator logs into the
switch, the login banner is displayed. It is also displayed as part of the output from the
show sys-info command.
Command mode: Global configuration
[no] hostname <character string>
Enables or disables displaying of the host name (system administrator’s name) in the
Command Line Interface (CLI).
Command mode: Global configuration
[no] bootp
Enables or disables the use of BOOTP. If you enable BOOTP, the switch will query its
BOOTP server for all of the switch IP parameters. The default setting is enabled.
Command mode: Global configuration
[no] dhcp
Enables or disables Dynamic Host Control Protocol for setting the management IP address on
the management interface. When enabled, the IP address obtained from the DHCP server
overrides the static IP address. The default setting is enabled.
Command mode: Global configuration
[no] system reset-control
Enables or disables the reset control flag. When enabled, the switch continues to function
after a crash of the main processor, using the last known Layer 2/3 information.
Command mode: Global configuration
show system
Displays the current system parameters.
Command mode: All
Table 88 System Configuration Commands
Command Syntax and Usage