BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
178
 Chapter 4: Configuration Commands BMD00115, August 2009
RADIUS Server Configuration
Table 91 RADIUS Configuration Commands
Command Syntax and Usage
[no] radius-server primary-host <IP address>
Sets the primary RADIUS server address.
Command mode: Global configuration
[no] radius-server secondary-host <IP address>
Sets the secondary RADIUS server address.
Command mode: Global configuration
radius-server host <IP address> key <1-32 characters>
This is the primary shared secret between the switch and the RADIUS server(s).
Command mode: Global configuration
radius-server secondary-host <IP address> key <1-32 characters>
This is the secondary shared secret between the switch and the RADIUS server(s).
Command mode: Global configuration
[default] radius-server port <UDP port number>
Enter the number of the UDP port to be configured, between 1500 - 3000. The default is 1645.
Command mode: Global configuration
radius-server retransmit <1-3>
Sets the number of failed authentication requests before switching to a different RADIUS
server. The default is 3 requests.
Command mode: Global configuration
radius-server timeout <1-10>
Sets the amount of time, in seconds, before a RADIUS server authentication attempt is
considered to have failed. The default is 3 seconds.
Command mode: Global configuration