BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
182
 Chapter 4: Configuration Commands BMD00115, August 2009
[no] tacacs-server secure-backdoor
Enables or disables TACACS+ secure back door access through Telnet, SSH/SCP, or
HTTP/HTTPS only when the TACACS+ servers are not responding.
This feature is recommended to permit access to the switch when the TACACS+ servers
become unresponsive. If no back door is enabled, the only way to gain access when
TACACS+ servers are unresponsive is to use the back door via the console port.
The default is disabled.
Command mode: Global configuration
[no] tacacs-server privilege-mapping
Enables or disables TACACS+ privilege-level mapping.
The default value is disabled.
Command mode: Global configuration
[no] tacacs-server password-change
Enables or disables TACACS+ password change.
The default value is disabled.
Command mode: Global configuration
primary-password
Configures the password for the primary TACACS+ server. The CLI will prompt you for
input.
Command mode: Global configuration
secondary-password
Configures the password for the secondary TACACS+ server. The CLI will prompt you for
input.
Command mode: Global configuration
[no] tacacs-server command-authorization
Enables or disables TACACS+ command authorization.
Command mode: Global configuration
Table 92 TACACS+ Server Commands
Command Syntax and Usage