BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 189
snmp-server read-community <1-32 characters>
Configures the SNMP read community string. The read community string controls SNMP
“get” access to the switch. It can have a maximum of 32 characters. The default read
community string is public.
Command mode: Global configuration
snmp-server write-community <1-32 characters>
Configures the SNMP write community string. The write community string controls SNMP
“set” and “get” access to the switch. It can have a maximum of 32 characters. The default
write community string is private.
Command mode: Global configuration
snmp-server trap-src-if <interface number>
Configures the source interface for SNMP traps. The default value is interface 1.
To send traps through the management ports, specify interface 256.
snmp-server timeout <1-30>
Sets the timeout value for the SNMP state machine, in minutes.
Command mode: Global configuration
[no] snmp-server authentication-trap
Enables or disables the use of the system authentication trap facility. The default setting is
disabled.
Command mode: Global configuration
[no] snmp-server link-trap
Enables or disables the sending of SNMP link up and link down traps. The default setting is
enabled.
Command mode: Global configuration
Table 95 System SNMP Commands
Command Syntax and Usage