BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
20
 Chapter 1: ISCLI Basics BMD00115, August 2009
Table 3 ISCLI Command Modes
Command Mode/Prompt Command used to enter or exit
User EXEC
Router>
Default mode, entered automatically on console
Exit: exit or logout
Privileged EXEC
Router#
Enter Privileged EXEC mode, from User EXEC mode: enable
Exit to User EXEC mode: disable
Quit ISCLI: exit or logout
Global Configuration
Router(config)#
Enter Global Configuration mode, from Privileged EXEC mode:
configure terminal
Exit to Privileged EXEC: end or exit
Interface IP
Router(config-ip-if)#
Enter Interface IP Configuration mode, from Global Configuration
mode: interface ip <interface number>
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end
Interface loopback
Router(config-ip-loopback)#
Enter Interface Loopback Configuration mode, from Global
Configuration mode: interface ip loopback <1-5>
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end
Interface port
Router(config-if)#
Enter Port Configuration mode, from Global Configuration mode:
interface port <port number>
Exit to Privileged EXEC mode: exit
Exit to Global Configuration mode: end
VLAN
Router(config-vlan)#
Enter VLAN Configuration mode, from Global Configuration mode:
vlan <VLAN number>
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end
Router OSPF
Router(config-router-ospf)#
Enter OSPF Configuration mode, from Global Configuration mode:
router ospf
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end