BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 207
User Access Control Configuration
The following table describes user-access control commands.
Passwords can be a maximum of 128 characters.
Table 107 User Access Control Configuration Commands
Command Syntax and Usage
access user <1-10>
Configures the User ID.
Command mode: Global configuration
access user eject <user name>
Ejects the specified user from the switch.
Command mode: Global configuration
access user user-password <1-128 characters>
Sets the user (user) password. The user has no direct responsibility for switch management.
He or she can view switch status information and statistics, but cannot make any configuration
changes.
Command mode: Global configuration
access user operator-password <1-128 characters>
Sets the operator (oper)password. The operator manages all functions of the switch. He or
she can view all switch information and statistics and can reset ports or the entire
switch.Command mode: Global configuration
access user administrator-password <1-128 characters>
Sets the administrator (admin) password. The super user administrator has complete access
to all information and configuration commands on the switch, including the ability to change
both the user and administrator passwords.
Access includes “oper” functions.
Command mode: Global configuration
show access user
Displays the current user status.
Command mode: All except User EXEC