BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 213
Port Configuration
Use the Port Configuration commands to configure settings for switch ports.
Note – Port 19 is reserved for switch management.
Table 112 Port Configuration Commands
Command Syntax and Usage
interface port <port number>
Enter Interface port mode.
Command mode: Global configuration
dot1p <0-7>
Configures the port’s 802.1p priority level.
Command mode: Interface port
pvid <VLAN number>
Sets the default VLAN number which will be used to forward frames which are not VLAN
tagged. The default number is 1 for non-management ports.
Note: VLAN 4095 is reserved for switch management.
Command mode: Interface port
name <1-64 characters>
Sets a name for the port. The assigned port name appears next to the port number on some
information and statistics screens. The default is set to None.
Command mode: Interface port
[no] rmon
Enables or disables Remote Monitoring for the port. RMON must be enabled for any RMON
configurations to function.
Command mode: Interface port
[no] learning
Enables or disables FDB learning on the port.
Command mode: Interface port