BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
214
 Chapter 4: Configuration Commands BMD00115, August 2009
[no] tagging
Disables or enables VLAN tagging for this port. The default setting is disabled for uplink
ports and enabled for downlink ports.
Command mode: Interface port
[no] tag-pvid
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is removed from
packets whose VLAN tag matches the port PVID. The default setting is disabled for
downlink ports and uplink ports, and enabled for management ports.
Command mode: Interface port
[no] flood-blocking
Enables or disables port Flood Blocking. When enabled, unicast and multicast packets with
unknown destination MAC addresses are blocked from the port.
Command mode: Interface port
[no] broadcast-threshold <0-262143>
Limits the number of broadcast packets per second to the specified value. If disabled, the port
forwards all broadcast packets.
Command mode: Interface port
[no] multicast-threshold <0-262143>
Limits the number of multicast packets per second to the specified value. If disabled, the port
forwards all multicast packets.
Command mode: Interface port
[no] dest-lookup-threshold <0-262143>
Limits the number of unknown unicast packets per second to the specified value. If disabled,
the port forwards all unknown unicast packets.
Command mode: Interface port
no shutdown
Enables the port.
Command mode: Interface port
Table 112 Port Configuration Commands
Command Syntax and Usage