BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
216
 Chapter 4: Configuration Commands BMD00115, August 2009
Port Link Configuration
Use these commands to set flow control for the port link.
Table 113 Port Link Configuration Commands
Command Syntax and Usage
speed {10|100|1000|10000|auto}
Sets the link speed. Some options are not valid on all ports. The choices include:
 10 Mbps
 100 Mbps
 1000 Mbps
 10000 Mps
 any (auto negotiate port speed)
Command mode: Interface port
duplex {full|half|any}
Sets the operating mode. The choices include:
 “Any,” for auto negotiation (default)
 Half-duplex
 Full-duplex
Command mode: Interface port
no flowcontrol {receive|send|both}
no flowcontrol
Sets the flow control. The choices include:
 Receive flow control
 Transmit flow control
 Both receive and transmit flow control (default)
 No flow control
Command mode: Interface port
show interface port <port number>
Displays current port parameters.
Command mode: All