BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
220
 Chapter 4: Configuration Commands BMD00115, August 2009
Port Spanning Tree Configuration
Table 117 Port STP menu options (/cfg/port/stp)
Command Syntax and Usage
[no] spanning-tree edge
Enables or disables this port as an edge port. An edge port is not connected to a bridge, and
can begin forwarding traffic as soon as the link is up. Configure server ports as edge ports
(enabled).
[no] spanning-tree link-type p2p|shared
Defines the type of link connected to the port, as follows:
 no: Configures the port to detect the link type, and automatically match its settings.
 p2p: Configures the port for Point-To-Point protocol.
 shared: Configures the port to connect to a shared medium (usually a hub).
show interface port {<port number>}
Displays current port configuration parameters.
Command mode: All