BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 221
Quality of Service Configuration
Quality of Service (QoS) commands configure the 802.1p priority value and DiffServ Code Point
value of incoming packets. This allows you to differentiate between various types of traffic, and
provide different priority levels.
802.1p Configuration
This feature provides the switch the capability to filter IP packets based on the 802.1p bits in the
packet's VLAN header. The 802.1p bits specify the priority that you should give to the packets
while forwarding them. The packets with a higher (non-zero) priority bits are given forwarding
preference over packets with numerically lower priority bits value.
Table 118 802.1p Configuration Commands
Command Syntax and Usage
[default] qos transmit-queue mapping <priority (0-7)> <COSq number>
Maps the 802.1p priority of to the Class of Service queue (COSq) priority. Enter the 802.1p
priority value (0-7), followed by the Class of Service queue that handles the matching traffic.
Command mode: Global configuration
[default] qos transmit-queue weight-cos <COSq number> <weight (0-15)>
Configures the weight of the selected Class of Service queue (COSq). Enter the COSq
number, followed by the scheduling weight (0-15).
Command mode: Global configuration
show qos transmit-queue
Displays the current 802.1p parameters.
Command mode: All except User EXEC